FEATURES:
Year: | 2024 |
Homeport: | MALLORCA |
LOA (m.): | 7.99 |
Beam (m.): | 2,56 |
Draught (m.): | 2 |
Cabins (m.): | 2 |
Material: | FIBERGLASS |
Engine type: | MERCURY 9.9 OUTBOARD - 4S |
Max Engine Power (cv): | 9,9 HP |
Fuel tank (l.): | 12 LT. |
Fresh water (l.): | / |
Hours: | 0 - 03.2024 |
Beneteau First 27 SE delivers fun and modern downwind planing sailing thanks to modern design and building technologies. Families will go cruising, you'll enjoy a fun and exciting day sailing, and she will win trophies on the club races. Interior of this pocket-cruiser can welcome up to 6 persons and offers separated bow-cabin, open space saloon, galley with freshwater, fridge and separated classic marine toilet.Board the ship and have fun!
CONSTRUCTION:
- Hull and deck constructed with Vacuum Infusion of Vinyl ester
resin, foam and Soric GRP sandwich with unidirectional and biaxial
laminates - Hull is reinforced with Infused GRP stringers in the keel and bow
sections - Hull and deck are moulded in single tone off-white,
- Deck with high traction non-skid moulded
- Carbon fibre beams laminated on keel box and glued to the deck to
support mast compression and keel hydraulic ram - Two transoms hung balanced rudders, built of GRP foam sandwich,
- Red chainplates bolted to the main structural bulkhead
- Bolts, screws and fittings are all made of stainless marine grade
stainless steel - Faired underwater areas, ready for sanding, epoxy primer and
antifouling application
SWINGING KEEL SYSTEM:
- Swinging keel with “elephant leg” lead bulb, main steel structural
element and epoxy GRP enclosure - Laminated areas of the keel are pre-painted with epoxy primer for
easier antifouling treatment - Manually operated hydraulic pump with stainless steel hydraulic ram
built in the carbon fibre mast support
DECK EQUIPMENT:
- 60 cm high stainless steel pulpit, pushpit and six stanchions painted
in mat black, with double lifelines - Stainless steel bow and stern mooring cleats
- Stainless steel chain plates for side shrouds and forestay painted in
mat red - Four Wichard folding pad eyes for lifting straps at mid-two stations,
- 2x Harken STA15 secondary halyard winches and 2x Harken STA20
jib and gennaker trim primary winches - 2x Spinlock winchfeeder on the coachroof
- Two rope bags and two winch handle bags, Outils Océans & First
branded - Wide mainsail traveller, installed over the tiller
- Carbon tiller with Spinlock EA1200DS tiller extension
- Laminated tempered glass windows on both sides of the hull
- An opening hatch of 58 cm x 58 cm / 23 x 23 inch for light
- ventilation and deck access to the mid-section compartment
- An opening hatch of 25,5 cm x 25,5 cm / 10 x 10 inch for front
cabin ventilation - Bow anchor locker with Dyneema J3 staysail attachment point on
the deck - Stern storage compartment cover
- Foldable outboard cockpit compartment with two top & one bottom
cover and engine bracket for internal combustion outboard (not
mounted) - Manual bilge pump operated from the cockpit
MAST & RIGGING:
- CompoTech mast and boom with two sets of swept-back spreader build in high-quality carbon fibre
- Ronstan Series 19 aluminium track for mainsail cars (cars not included; they are part of the mainsail option)
- All carbon parts UV protected
- Mast transport & storage bag
- Continuous 1x19 standing rigging with
- Bottle screw adjusters
- Retractable carbon bowsprit controlled from the cockpit
- Dyneema pole-out control line
- Dyneema gennaker tackline
- 2:1 Dyneema mainsail halyard with Wichard MX8 halyard shackle
- Dyneema jib halyard
- 2:1 Dyneema staysail halyard
- Dyneema masthead gennaker halyard
- Dyneema fractional gennaker halyard
- 9x Spinlock clutches for halyards, mainsail reefs and bowsprit
control lines - Ronstan blocks and cleats for the mainsail, jibs and gennakers
control lines - One tapered mainsheet with ball bearing low friction blocks
- Three mainsail reef lines
- Control line for the mainsail traveller
- 8:1 outhaul purchase led inside the boom
- 8:1 cunningham purchase
- 16:1 vang purchase
- Three jib sheets
- Spliced Dyneema jib inhaulers with a fixed length,
- 2:1 jib downhaulers with control lines, cleats and blocks
- Two tapered gennaker sheets with blocks
- Mast transport & storage bag
ELECTRICITY:
- Custom electric control panel with five switches and smart Philippi
LCD battery control display - Remotely controlled master switch on the control panel
- Standard 12V and USB plugs in the saloon
- 12V 70AH AGM battery
- Ambiental indirect LED lights around the ceiling
- One mid-section and two front cabin battery LED lights
- Masthead LED navigation and anchor light
- Sentinel tracker to connect, monitor and control boat systems
remotely on your mobile phone with a 1-year subscription - Pre-wiring for most of the available electrical options
INTERIOR:
- Bulkheads and furniture lightly covered with mat paint with white
gel coat on the moulded parts for light, clean and low maintenance
finish
Front Cabin:
- Double V-berth with insubmersibility volume underneath
- Opening hatch of 25,5 cm x 25,5 cm / 10 x 10 inch for front cabin
ventilation
Mid-section compartment / Wet room:
- An opening hatch of 58 cm x 58 cm / 23 x 23 inch for light
- ventilation and deck access to the mid-section compartment
- The base for chemical or flush toilette with monolithic
reinforcements for valves on the starboard side
Saloon:
- Bright and spacious saloon area with large Plexiglass companionway
washboard and sliding hatch - Dedicated storage place for washboard back of the companionway
steps - Benches on both sides of the saloon, divided into four wooden
covers of the storage space underneath - Main electric box and battery in aft port compartment and keel
hydraulic pump under aft starboard compartment - Padded back-supports with gimbal cooker holder attachment points
on both sides and storage behind the nets - Wide berths in the stern on both sides, with insubmersiblity
chambers underneath - Front and aft keel box covers with table attachment point with a
screw on the aft - Electric boxes under the ceiling and under the companionway
- Extra storage room under the companionway and engine box for
fresh-water tank or other systems, with cover - Two ergonomically shaped wooden companionway steps
- Well insulated 40L icebox below bottom companionway step, with
fridge compressor upgrade possibility - Light grey EVA foam floorboards
- Shrouds attachments counter plates painted in mat red
PROPULSION
MERCURY 9,9 HP OUTBOARD ENGINE WITH ELECTRIC
STARTER:
- Mercury 9.9 HP outboard engine (short shaft, remote controls, electric starter), integrated into the cockpit engine compartment
- Throttle and gear remote control system with Teleflex commands, removable Spinlock handle and push-pull cables
- Electric starter with key
- 6 A alternator for charging of the battery
- Custom installation parts (engine foot rubber support, storage position padding)
- Standard Mercury 12 L fuel tank with connection hose
- Strap with attachment points for fixation of the petrol tank
- Complete installation and electric wiring
SAILS & RIGGING
FIRST 27 SE FACNOR FLATDECK FURLER FOR THE JIB
(FD110):
- Facnor FD110 flatdeck furler with flat aluminium profile
- Spinlock clutch for furling line on the side of the cockpit
- Customised forestay toggle
BARTON RODKICKER/BOOMKICKER:
- Barton composite Boomstrut
- Prevents the boom from dropping into the cockpit or onto the coach roof
- Boom and mast foot reinforcement
ADJUSTABLE JIB INHAULERS:
- Adjustable jib inhauler for precise 3D trim of the jib
- 6:1 purchase on the coachroof
- Replacing standard fix-length jib inhauler and allowing active trim of the jib sheeting angle
FIRST 27 SE NORTH SAILS SQUARE TOP MAINSAIL:
- Square top mainsail with full battens and three reefs
- Durable and robust NPL Tour laminate material in light grey, triradial cut, 26,2 m2 / 282 sq ft
- Ronstan Series 19 Ball-Bearing Batten Car System for aluminium
mast track
FIRST 27 SE NORTH SAILS J1 JIB FOR FURLER:
- J1 furling jib with vertical battens for Facnor FD110
- Durable and robust NPL Tour laminate material in light grey, triradial
cut 19,5 m2 / 210 sq ft
FIRST 27 SE NORTH SAILS J3 FURLING STAYSAIL WITH FURLER:
- Furling J3 jib with structural luff to be hoisted on the dedicated 2:1 halyard
- Triradial cut, hydranet material
- Facnor FX 1500+ furler set with spliced continuous furling line
- Wichard MX6 halyard shackle
FIRST 27 SE NORTH SAILS A5 FRACTIONAL GENNAKER IN A
CHOSEN COLOUR:
- Fractional gennaker, reacher, 64 m2 / 689 ft2
- Nylite 90 - Performance Ripstop nylon, 1,12 oz.
- Colour options – RED, WHITE or BLACK
NAVIGATION & ELECTRONICS
ELECTRIC PUMP UPGRADE FOR HYDRAULIC KEEL SYSTEM:
- Upgrade of standard manual hydraulic system with 12V electric pump
- Double safety control switches on the electric panel
- Manual operation of the keel remains possible
COMPASS PLASTIMO CONTEST 101:
- Plastimo Contest 101 compass mounted on bulkhead next to companionway
- Compass light connected to navigation lights switch
SOLAR PACK:
- Sunbeam Tough series walkable 55W solar panel
- Placed on the cabin in front of the mast with connection cable hidden under the panel
- Smart MPPT solar panel regulator for up to 30% better panel efficiency
and Bluetooth connectivity
WINDEX
GARMIN COASTAL PACK:
- GMI 20 large and bright 4’’ QVGA colour displays with LED backlighting, installed on the coachroof
- Airmar DST810 depth, speed and temperature transducer
- gWind race wired wind transducer
- External GPS 24xd antenna
- NMEA2000 backbone kit and wiring
- Dedicated switch on the control panel
GARMIN AUTOPILOT PACK:
- Underdeck autopilot installation, instantly available for use
- Reactor™ 40 Course Computer Unit with ECU 10 pack
- GHC 50 Autopilot Instrument for operation and control
- Reactor™ Autopilot Remote Control
- GRF 10 Rudder Feedback Sensor
- Raymarine mechanical linear drive, Type 1
- Wiring, installation cables, quadrant arm and other assembly parts
- Dedicated switch for an autopilot on the control panel
GARMIN CHARTPLOTTER PACK:
- GPSMAP 723 touchscreen Chartplotter with high-resolution IPS display
- Supplied with Worldwide Base map, WITHOUT detailed regional charts
- Garmin Sailassist™ sailing features
- Installed on unique swinging bracket at the companionway, with
adjustable angles for perfect visibility and inside use as well - Wiring and dedicated control panel switch
GARMIN VHF 215I MARINE RADIO WITH AIS:
- Garmin VHF 215i AIS Marine Radio with standard Class D Digital Selective Calling (DSC) functionality
- Garmin AIS 800 Blackbox Transceiver, including VHF antenna splitter for Class-B AIS system
- External GA 38 GPS/GLONASS antenna
- SCOUT KM-10S VHF Fiberglas Antenna
- Wiring and dedicated control panel switch
230V CHARGING PACK:
- 230V charger with fuse
- External shore cable plug
- Shore cable + adapter to standard 230V plug
- Internal 230V plug
COOKER GIMBAL:
- Aluminium gas cooker gimbal optimised for Jetboil Flash cooker (not
included) - Can be fixed on the saloon back-supports on both sides
CLASSIC TOILET:
- ABS plastic bowl (only 3 kg / 6,61 lbs) by RM,
- 30 L / 7.9 gallons unique blackwater tank, installed in the toilet compartment
- Plumbing with Trudesign valves
FIRST 27 SE COMFORT PACK IN A CHOSEN COLOUR:
- Faux leather cushions on the front V-berth and saloon benches
- A foldable wooden table on the keel-box
- Two foldable magnetic doors closing the toilet compartment and Sail
locker panel in chosen faux leather colour - Faux leather colour options – GREY and TURQUOISE
FIRST SE CREW BAGS (6 PIECES) IN A CHOSEN COLOUR:
- Water repellent PVC easy-to-hang FIRST SE crew bags,
- Attachment points for four bags in the saloon and two in the front
cabin - FIRST SE handles in red
- Colour options – GREY, WHITE, BLUE and RED
MOORING PACK:
- Spade A60 aluminium anchor (4,5 kg / 10 lbs),
- 40 m/12 mm / 131’ 3’’/0,47-inch rope for the anchor with first 10 m
/ 32’ 10’’ with lead insert - Mooring lines 10m/12mm / 32’ 10’’/0,47 inch with spliced ends, 4x
- Outils Océan Custom square foam fenders with fixation ropes, 4x
LAZY BAG
FURLING JIB COVER
SUNSHADE WITH POLES
TRANSPORT & COMMISSIONING